Home › Electrician
Safe electricity, fast breakdown service & professional installation
From distribution boards/meter cupboards and additional circuits to charging stations , solar panel connections , cooking circuits (Perilex) , and lighting . Certified electricians, meticulously finished, and compliant with NEN1010 and NEN3140 standards.
Working area: 's-Hertogenbosch, Rosmalen, Vught and surroundings • Private & business
Why New-Heating as your electrician?
NEN-compliant & measurement report
We work in accordance with NEN1010/NEN3140 and can provide a concise measurement report (earth leakage test, insulation resistance, loop impedance) if required.
Faults resolved quickly
Short circuit? Tripping earth leakage? We'll locate the faulty circuit or appliance and safely repair the system.
Ready for 3-phase & EV
From single-phase to three-phase, charging stations , heat pumps , and solar panels : we size the distribution board for future loads.
Services: from breakdowns to complete installation
Electrical breakdown service
- Earth leakage that keeps tripping
- Short circuit / blown fuse
- Tension disappears in a group or room
- Moisture/leak in outdoor socket or lighting
Meter cupboard & distribution box
- New cabinet (1- or 3-phase) with earth leakage circuit breakers
- Additional groups (kitchen, heat pump, air conditioning)
- Surge protection & selectivity
- AFDD (Arc-Fault) optional for additional fire safety
Charging station (EV) & 3-phase
- Charging station at home or business
- Power balance & load balancing
- Grid management application 3-phase
- Neatly finished cabling
Solar panels & inverters
- Connecting the inverter to the distribution box
- DC wiring & AC protection
- Inspection of existing PV installations
- Monitoring & grid selectivity
Kitchen electrical system (cooking group)
- Perilex connection for induction/electric cooking
- New groups for combination oven/dishwasher
- Splashproof sockets
- Neatly visible: finish with stainless steel/sleek
Inspection & approval
- NEN1010 (new/renovation)
- NEN3140 (periodic use)
- Report with repair advice
- For housing, homeowners' associations and SMEs
What does an electrician do? (Layman's Introduction)
An electrician designs and builds safe electrical systems that supply your home or business with electricity. This starts with the meter/fuse box with protection devices (circuit breakers, earth leakage circuit breakers, and occasionally AFDD), extends through wiring and junction boxes to outlets and lighting , and ends with specific connections such as cooking groups (Perilex) , charging stations , or solar panels . We ensure that cable thickness, protection, and circuit distribution are correct, ensuring your installation is reliable and fire-safe .
Our working method:
- Inventory of wishes and burden (current and future)
- Design with correct distribution of groups, RCDs and selectivity
- Installation according to NEN standards, neatly finished
- Measurements & testing (earth leakage, insulation, loop impedance)
- Explanation & report – you know exactly what has been done
Malfunctions: what happens and what can you do yourself?
Earth leakage keeps tripping
Often caused by a leakage current (moisture, defective appliance). Turn off all circuits, activate the earth leakage circuit breaker, then turn on the circuits one by one. Is it connected to just one circuit? Report the fault; we'll isolate the problem.
Short circuit
This is due to a wiring or device fault. Don't allow fuses/circuit breakers to trip. We measure the loop impedance, inspect junction boxes, and replace wiring if necessary.
Tension partially disappears
This could indicate a loose connection or overload. We check terminals, distribution boards, phase balance, and address heat traces/fire hazards.
Rates (indicative)
| Employ | Indication | Explanation |
|---|---|---|
| Breakdown visit (1st hour) | €95-€135 | Incl. diagnosis; excl. materials |
| New distribution box (1-phase) | €750-€1,200 | Number of groups/residual current circuit breakers determines price |
| New distribution box (3-phase) | €950-€1,600 | With 3-phase main switch & RCDs |
| Create additional group | €160-€350 | Length of route/finish |
| Connecting a charging station | €450-€1,200 | Excl. charging station |
| NEN3140 inspection (residential) | €149-€299 | With basic report and repair advice |
Prices are guidelines; we always set a fixed price after a brief consultation.
Blog & knowledge base
Distribution board explanation: earth leakage, circuit breaker, selectivity & 3-phase
Reading time: 6 min
The distribution board (also known as the meter box) is the heart of your electrical system. Each group protects a section of your home with a circuit breaker . The residual current device (RCD) monitors leakage currents and prevents hazards from contact or moisture. For heavier or fire-critical circuits, we increasingly opt for residual current devices (RCDs ) or even AFDD (Arc-Fault).
Selectivity means that in the event of a fault, only the nearest breaker is activated. This keeps the rest of your home powered. When upgrading to 3-phase (EV charging, induction, heat pump), we balance the load across all three phases.
Replacement checklist
- Are there enough free modules for future groups?
- Is a charging station or solar panel inverter compatible without overloading?
- Is there surge protection on the main side?
- Has AFDD been considered in critical circuits (bedrooms/timber construction)?
Unsure? Request a free consultation .
Residual current circuit breaker trips: 7 common causes
Reading time: 5 min
- Moisture in outdoor socket or fixture
- Faulty appliance (dishwasher, boiler, refrigerator)
- Damage to cable or junction box
- Flickering garden lighting (ground cables)
- Incorrect neutral wire combination
- Outdated RCD that trips too quickly
- PV inverter with leakage current – wrong RCD type
Start by turning off the circuits → turning on the earth leakage circuit breaker → turning on the circuits one by one . If it fires again on one circuit, the culprit is known. No time for puzzles? Schedule a breakdown service .
Cooking on induction: do you need a cooking group?
Reading time: 4 min
In many cases, you'll need a cooking group with a Perilex connection . We'll check the power, cable thickness, and protection. For 3-phase cooktops, we'll configure the distribution board accordingly and distribute the load evenly.
Have your kitchen prepared for installation: free kitchen check .
Frequently Asked Questions
Do you also do small jobs?
Yes. From an extra outlet or lamp to a complete redistribution of circuits.
Can you come immediately in case of a breakdown?
Often the same day; schedule your outage and we'll call you back with a scheduled time.
Do you also arrange 3-phase with the grid operator?
Yes, we support the request and adjust the distribution box in accordance with the regulations.
Ready for safe, future-proof electricity?
Request free, no-obligation advice. We'll brainstorm with you, take measurements, and deliver flawless work.
All CTAs refer to the same form for rapid follow-up.
Cities & regions where we operate
We serve all of the Netherlands. Choose your location or region and schedule your free consultation today.
North Brabant
Gelderland
Utrecht
Limburg
Zealand
Friesland
Groningen
Looking for an electrician? We solve these problems every day.
Additional search terms customers search for – and where we help:
- electrician breakdown service • earth leakage trips • solve short circuit
- replace meter box / distribution box • extra groups • 3-phase connection
- charging station installation at home/business • load balancing • grid management request
- Installing a cooking group • Perilex connection • Preparing the kitchen electrical system
- connecting solar panels inverter • AC/DC cabling • selectivity
- NEN1010 / NEN3140 inspection • measurement report • insulation resistance • RCD test
- installing sockets & lighting • garden lighting • moisture problems
- electrician place name (Den Bosch, Eindhoven, Tilburg, Utrecht, Rotterdam, Amsterdam, etc.)
Need immediate help or advice? Schedule your free consultation .
