Plumbing work from A to Z — complete national guide
Looking for a reliable plumber who can handle everything —from leaks and blockages to plumbing , central heating/heat pump boilers , gas , and roofing ? This page explains our approach in clear steps : Diagnosis → Solution → Replacement → Maintenance → Prevention . Useful for individuals, homeowners' associations, and businesses. Delivery times and a comprehensive FAQ are included.
Introduction: What does a plumber do?
A plumber specializes in water, gas, drainage, and heating systems . We install new systems, resolve malfunctions and leaks, and maintain pipes, faucets, plumbing fixtures, central heating/heat pump boilers, roofing, and rainwater drainage. We also perform inspections, pressure tests, leak detection , and certifications . The goal: safety, comfort, and a trouble-free system with a long lifespan .
*If you smell gas, call 911 immediately and turn off the main shutoff valve. Ventilate and avoid sparks.
Our 5-phase approach
- Diagnosis – Visual inspection, moisture measurement, camera inspection, smoke test, pressure test and (optional) thermography for hidden leaks.
- Solution – Fast recovery with appropriate techniques: unblocking (mechanical/high pressure), repairing, sealing or temporarily bridging.
- Replacement – If necessary, we replace pipes, siphons, taps, drain lines, sanitary facilities or roof parts in accordance with standards.
- Maintenance – Periodic inspection, cleaning and adjustment for maximum life and minimal malfunctions.
- Prevention – Advice on ventilation, non-return valves, frost protection, water pressure and correct HWA dimensions.
All plumbing services
Leak detection & leaks
- Detecting hidden leaks (floors, walls, shafts) with thermography, tracer gas and pressure testing.
- Restoration of copper, stainless steel, PEX, PVC and PE connections; restoration of joints and sealing seams.
- Mitigating water damage: temporary sealing, drying, and reporting for insurance.
Blockages & sewer
- Unblocking drains , toilets , sinks , showers , rainwater drains and main sewers (mechanical/high pressure).
- Camera inspection and smoke test; repair or replacement of sagging or ingrown pipes.
- Prevention: Grease separator advice, inspection plan and periodic cleaning for homeowners' associations/companies.
Sanitary & bathroom
- Installing and replacing taps, toilets, shower drains, baths, walk-in showers and furniture.
- Bathroom renovation: dismantling, piping, tiling, sealing and finishing.
- Water-saving solutions (eco shower heads, thermostatic mixer taps).
Heating, central heating & heat pump boilers
- Maintenance and breakdown service for central heating systems and heat pump boilers (incl. hot water optimization).
- Pressure loss analysis, bleeding, topping up, checking expansion vessel and safety valves.
- Replacing or installing radiators, adjusting systems, legionella prevention.
Gas installations
- Installation, modification and inspection of gas pipelines in accordance with current standards.
- Detect gas leaks (sniffer, pressure test) and repair immediately with documentation.
- Safety advice: ventilation, flashback protection and shut-off valves.
Roof & rainwater drainage
- Repair/renovation of bitumen, EPDM, and zinc roofs; penetrations, lead flashings, and roof valleys.
- Check HWA dimensions, install leaf separators, collection bins and emergency overflows.
- Emergency assistance in case of roof leaks, hail damage and storm damage.
Inspections, approvals & reporting
- CO safety, gas tightness test and reports (if applicable).
- Insurance report with photos and measurements; recovery plan and schedule.
- VvE maintenance plan (MJOP) for drainage/roof and collective facilities.
Prevention & maintenance
- Periodic maintenance: clean siphons, bleed, check sealing seams, descale.
- Frost protection, non-return valves, pressure reduction and good ventilation for drainage.
- Monitoring and maintenance contracts for companies and homeowners' associations.
Overview (quick reference)
- All-round plumbing work
- Unblocking drain
- Flushing the main sewer
- Sanibroyeur service
- Gas pipeline (installation/adjustment)
- Leak detection & reporting
- CO‑safety
- Roof/crawl space work (2 professionals)
- Bathroom & sanitary facilities
- CV & heat pump boilers
- Roof & Rainwater Drainage
- Maintenance & prevention
Costs & working method
We work with transparent quotes based on a brief diagnosis . You'll receive a clear scope of work upfront, including materials, schedule, and warranty terms. This way, you know exactly what we're doing and when it'll be completed—without displaying prices on this page.
- Factors : nature of the fault/job, accessibility (roof/crawl space), required materials and any drying time.
- Process : intake → diagnosis → proposal → implementation → aftercare/reporting.
- Savings : Sending photos and brand/model numbers speeds up the assessment and prevents unnecessary hours.
Request a free quote . For urgent matters, we'll schedule it immediately and send you a confirmation by email.
Working area: all of the Netherlands
We schedule technicians nationwide . The provinces below cover our entire service area:
Frequently Asked Questions
How soon can you come over?
Usually within 24–48 hours. In case of emergency, we'll schedule an appointment immediately—please call so we can assess the urgency.
Do I need a permit for plumbing or bathrooms?
Usually not for interior work. A permit or notification may be required for roof/supporting structures or facade modifications. We advise and assist with documentation.
Do you provide a guarantee?
Yes, labor and materials are in accordance with the manufacturer's specifications. In the event of hidden defects or water damage, we will create a clear repair plan.
Can you report for insurance or homeowners' association?
Yes, we provide photos, measurements, and diagnostic reports that meet the requirements of insurers and homeowners' association management.
Contact & quotation
Send us your situation (brief description, photos, and address). We'll respond quickly with an estimate or schedule a diagnostic visit.
Tip: Add photos and mention the brand/type of your installation (tap, toilet, central heating/heat pump boiler, roofing).
Maintenance calendar per season
Spring
- Cleaning gutters and drains after winter storms.
- Pressure test central heating and check expansion vessel after heating season.
- Inspection of sealant joints in bathroom/kitchen; repair where necessary.
Summer
- Roof inspection (EPDM/bitumen/zinc), check penetrations.
- Legionella prevention: check the heat tap setting.
- Flush drains in buildings with low occupancy.
Autumn
- Remove leaf litter, check collection bins.
- Frost protection for outdoor taps; disconnect hoses.
- Check the ventilation/bleeder of the drain (odor prevention).
Winter
- Check for frost risk in shafts/crawl spaces.
- Check pressure reduction/safety valve in cold weather.
- Check emergency overflow and HWA capacity during snow melting.
Tip: Combine maintenance appointments with a photo log; this speeds up insurance processing in the event of damage.
Legislation and regulations & standards (brief)
- Gas — Inspections and work must be carried out exclusively by qualified technicians; after any adjustment, always perform a gas tightness test and documentation.
- Drinking water — material selection and temperature settings tailored to Legionella prevention; avoid dead pipes.
- Roof/rainfall — detailing of penetrations/lead flashing in accordance with best practices; no water pockets, sufficient slope.
- Safety — ventilation and backdraft protection where required; work area cordoning off in crawl space/roof areas.
We provide test reports and a short delivery file (photos, measurements, materials) where necessary.
Materials & compatibility
| Material | Application | NB |
|---|---|---|
| Copper | Hot/cold water, central heating | Corrosion risk with incorrect connections; correct press profile |
| stainless steel | Drinking water/central heating (specific) | Fitting compatibility; avoid galvanic couplings |
| PEX | Hot/cold water | Correct casing and UV protection |
| PVC | Disposal | Sufficient slope, ventilation, sound insulation |
| PE | Outside/main supply | Check pressure class, correct compression fittings |
| Zinc/EPDM/Bitumen | Roof | Detailed finishing at roof edges/penetrations is crucial |
Step-by-step plan in case of leakage (for residents)
- Turn off the main water tap and switch off electricity in wet areas.
- Take photos/video of the situation (source, damage, water meter reading).
- Describe the complaint and location (bathroom, kitchen, roof) and note brand/model numbers.
- Call us or request a quote ; add images.
- Ventilate and capture droplets; move fragile items.
Insurance & damage
- We provide a clear diagnosis and repair report with photos and measurements.
- On request, we will specify materials and hours in the proposal/delivery.
- For homeowners' associations, we link findings to MJOP components and priorities.
Checklist upon delivery
- Work area clean and dry; waste removed.
- All connections visually checked and tested.
- Functionality tested (drain, tap, central heating, feed-through).
- Before/after photos shared + maintenance/prevention advice.
For companies & homeowners' associations
- Periodic inspections with reporting and prioritization (safety/comfort/damage).
- Appointment windows and key management are available; work outside office hours is possible upon consultation.
- Multi-year maintenance (MYM) with budget per year/component.
Sustainability & water conservation
- Water-saving taps/shower heads and pressure reduction where useful.
- Insulation of hot pipes and optimization of tap water temperatures.
- Reuse rainwater for gardening/cleaning (customised advice).
Do's and don'ts for blockages and leaks
Do's
- Clean the siphon regularly and install strainers.
- Don't pour grease and coffee grounds down the sink; use organic waste.
- After a storm, visually inspect the roof and gutters.
Don'ts
- No aggressive drain unblockers; risk of damage and fumes.
- No permanent tape/sealant on pressure lines; always repair.
- No bends in the drain; prevent disruptions to the slope.
Glossary (extended)
- Aerator — allows air into the drain to prevent vacuum and odors.
- HWA — rainwater drainage from roof to sewer or collection point.
- Thermography — thermal camera technology for moisture/leakage detection.
- Tracer gas — detection gas for micro-leaks in pipes.
- Expansion vessel — absorbs volume changes in central heating water.
- Check valve — prevents backflow of water/sewage.
- Slope — slope of drain for proper flow.
Glossary & Scope – North Brabant
Glossary of Plumbing Terms
- Drain – Pipes that carry wastewater to the sewer.
- Slope – Angle of inclination in drain pipes for optimal flow.
- Aerator – Allows air into drains to prevent vacuum and odors.
- CO measurement – Checking carbon monoxide in combustion equipment.
- Condensate drain – Drainage of condensate water from a central heating boiler or air conditioning system.
- Roof duct – Opening for ventilation, flue gas or HWA discharge through the roof.
- Pressure test – Test to detect leaks in pipes.
- Expansion vessel – Absorbs pressure differences in a central heating system.
- Gas tightness test – Test for safety of gas pipes.
- HWA – Rainwater drainage (gutters, downpipes, collection tanks).
- Sealant – Elastic seal between tiles or sanitary ware.
- Legionella prevention – Measures against bacterial growth in hot tap water.
- Press coupling – Connection technology for water and gas pipes.
- Sewer unblocking – Removing blockages in drains or sewers.
- Smoke test – Technique to detect leaks or odor sources in drains.
- Siphon – Bend in the drain pipe that prevents odors from entering.
- Thermography – Thermal camera technology for leak detection.
- Check valve – Prevents water from flowing back into the pipe.
- VCA – Safety certification for operational personnel.
All plumbing work
- Leak detection & leak repair
- Drain and sewer unblocking
- Installing & renovating sanitary facilities
- Bathroom renovation complete
- Kitchen and tap installation
- CV maintenance & installation
- Installing heat pump boilers
- Installing & inspecting gas pipes
- CO inspection & ventilation control
- Roofing (bitumen, EPDM, zinc)
- Gutter and downpipe repair
- Rainwater drainage construction
- Lead and zinc work repair
- Toilet replacement & sewer connection
- Basement waterproofing & pump sumps
- Installing water softeners
- Check valves and aerators
- Maintenance and prevention contracts
- Inspections and reports (insurance, homeowners' association)
- Emergency service in case of leaks or blockages
All cities and villages in North Brabant
We operate throughout the province of North Brabant. Below you'll find an overview of all the cities and towns where we provide plumbing services:
- 's-Hertogenbosch (Den Bosch)
- Boxtel
- Vught
- Rosmalen
- Tilburg
- Breda
- Eindhoven
- Helmond
- Oisterwijk
- Uden
- Veghel
- Oss
- Schijndel
- Heesch
- The Dungen
- Vlijmen
- Waalwijk
- Drunen
- Kaatsheuvel
- Heusden
- Loon op Zand
- Goirle
- Hilvarenbeek
- Oirschot
- Best
- Son and Breugel
- Veldhoven
- Eersel
- Bladel
- Reusel
- Gemert
- Bakel
- Deurne
- Someren
- Asten
- Nuenen
- Geldrop
- Mierlo
- Heeze
- Leende
- Budel
- Cranendonck
- Boxmeer
- Cuijk
- Grave
- Mill
- Landhorst
- Ravenstein
- Heesch
- Heeswijk-Dinther
- Veghel
- Schijndel
- Erp
- Volkel
- Zeeland (NB)
- Haps
- Overloon
- Wanroij
- Udenhout
- Lith
- Rijsbergen
- Made
- Raamsdonksveer
- Geertruidenberg
- Drimmelen
- Oosterhout
- Dongen
- Gilze
- Rows
- Moergestel
- Hank
- Werkendam
- Woudrichem
- Steenbergen
- Halsteren
- Bergen op Zoom
- Roosendaal
- Oudenbosch
- Bosschenhoofd
- Etten-Leur
- Zundert
- Rucphen
- Sprundel
- Prinsenbeek
- Chaam
- Alphen
- Baarle-Nassau
- Hilvarenbeek
- Bladel
- Reusel-De Mierden
- Vessem
- Hoogeloon
- Riethoven
- Steensel
- Westerhoven
- Leende
- Soerendonk
- Gastel
- Sterksel
- Maarheeze
- Budel-Dorplein
- Budel-Schoot
- Valkenswaard
- Bergeijk
- Luyksgestel
- Weebosch
North Brabant service area: we serve all locations within this province with complete plumbing services – from leak repair to installation and maintenance.
New-Heating carries out all plumbing work in the Netherlands and North Brabant in particular with a reliable 24/7 breakdown service
