Unico Evo monoblock air conditioner 30 HP EVAN R32 + inverter motor 2.6 kW cooling + 2.4 kW additional heating (incl. IR remote control and Wi-Fi)

The HP version air conditioner without an outdoor unit (HP = Heat Pump), designed for low-profile wall installation, similar to the position of a conventional water-fed radiator. Only two holes are required on the outside, plus a third for condensate drainage, if needed, only when using the heating function.

Features

• Cooling, additional heating, dehumidification and ventilation
• Economy function: for energy saving, by automatically optimising the machine's performance
• Auto function: modulates the operating parameters in relation to the ambient temperature
• Silent Mode function: This mode sets the machine to the lowest noise level. The compressor and fans are set to a sound pressure level of just 30 dB(A).
• Sync power system: The new Twin Rotary compressor and advanced electronics are synchronized for the greatest acoustic comfort, under all operating conditions.
• High efficiency: Thanks to the new compressor and the optimization of all components, Unico Evo achieves energy efficiency class A+ in cooling.
• Timer 24h with Wifi integrated.

Specifications

• Cooling class: up to A+
• Natural refrigerant: R32 (GWP=675)
• Internal layout of the machine optimized for easy maintenance.
• Wide flap for an even distribution of air in the room.
• Equipped with a multi-filter system consisting of an electrostatic filter (with anti-dust function) and an active carbon filter (effective against unpleasant odours).
• Backlit display and touch control on the machine.
• Contact on/off for activation or energy boost.
• There is an RS485 port suitable for controlling the air conditioning with external BMS via Modbus RTU.
• Packaging 100% recyclable, 98% plastic-free.
• Condensate drain: Mandatory, unless the "COLD ONLY" mode is selected during installation. See the installation manual for details.

Preconditions for operation

Internal ambient temperatures:

• Maximum operating temperatures in cooling mode DB 35°C - WB 24°C
• Minimum operating temperatures when cooling DB 18°C
• Maximum operating temperatures when heating DB 27°C
• Minimum operating temperatures when heating -

External ambient temperatures:

• Maximum operating temperatures in cooling mode DB 43°C - WB 32°C
• Minimum operating temperatures in cooling -
• Maximum operating temperatures when heating DB 24°C - WB 18°C
• Minimum operating temperatures when heating -15°C

(1) Test conditions: The data refer to the EN14511 standard - Heating mode: Temperature: external environment DB 7°C / WB 6°C; internal environment DB 20°C / WB 15°C Cooling mode: Temperature external environment DB 35°C / WB 24°C; internal environment DB 27°C / WB 19°C. * Hermetically sealed appliance using fluorinated gases with GWP equivalent 675 (R32).