Defro DRX PLUS 600HE Recuperator with Enthalpy Heat Exchanger

COMPACT HANGING AHU WITH HEAT RECOVERY

Ceiling recuperator with a thermal wheel, galvanized steel housing and LCD touchscreen

The EVO-T+ compact air handling unit with a CPR counterflow heat exchanger or RR rotary heat exchanger is a compact unit designed for heat recovery ventilation systems in all types of buildings, such as shops, restaurants, laundries, residential buildings, detached houses, etc. The unit can be optionally factory-fitted with an electric reheater or a water heater in the intake section. The unit has a full bypass (100%) of the counterflow heat exchanger. The unit operates on outside air and is powered by electricity.

To maintain the comfort temperature of the supply air at outdoor temperatures below 0°C, an electric preheater is used. A ground heat exchanger (GHEX) can be used to heat the inlet air (fresh outdoor air).

For the inlet and outlet EVO-T+ air handling units, the air flow can be realised in a system of parallel or crossing air flows.

Features

1. Casing

• Insulation – EPP
• Galvanized sheet steel
• Height H=355 mm*

2. Fan Set

• High-efficiency EC motors
• Independently controlled supply and discharge
• Configured on opposite sides of the heat exchanger

3. Heat recovery exchanger

• Countercurrent recuperator CPR / rotary regenerator RR
• CPR counterflow recuperator with 100% bypass
• Free cooling function
• CPR efficiency up to 91%
• RR efficiency up to 80%

4. Heater

• Secondary electrical or water, integrated
• Smooth PWM signal control

5. Automation

• Built into the device
• Connection to peripheral equipment
• Connection to CO2, PM and VOC sensors

Control panel

• 4.3" touchscreen
• BASIC panel (option)
• Built-in temperature sensor

Notification

• Modbus RTU, BACnet MS/TP
• Optional Modbus TCP/IP,
• BACnet IP, web server (www)

Work positions, configurations

Work positions:
Hanging, horizontal
Configuration:
Cross or parallel airflow