VSH Super elbow coupling 90° reducer FF 22x15 value pack

This VSH 90° elbow reducer is used for drinking water, heating systems, compressed air, and gas lines. With a brass compression fitting, you can easily create a safe and leak-free connection without welding, soldering, or pressing. The compression fitting can be reused; however, the compression ring must be replaced.

In addition to this 90° transition elbow, the range includes various couplings, such as:

• Clamp ring.
• knee 90°.
• Support sleeve.
• T-piece 90°.
• Union nut.

Properties

This VSH 90° reducing elbow with a high-tensile edge has a medium temperature range of -35°C to +200°C, with a short-term peak temperature of +250°C. The maximum operating pressure is 10 bar at 20°C. The coupling can be used with copper, stainless steel, or thin-walled galvanized steel pipes.

Assembly

With a brass compression fitting, you can easily create a strong and reliable connection without any special tools. All you need is a wrench to tighten the fitting, a pipe cutter to cut the pipe to size, and a deburrer to neaten the edges. The compression ring in the fitting ensures a leak-free connection.

Installing a compression coupling in a water pipe is done as follows:

• Cut the pipe to size and deburr the ends to prevent noisy piping.
• Slide the tube into the compression fitting up to the stop edge.
• Tighten the clamp nut hand-tight.
• Then tighten the compression fitting with a wrench;
• 12 and 15 mm with 1 complete turn.
• 22mm with a half to three-quarter turn.
• 28mm or more with approx. three-quarter turn.

Caution: If the nut is tightened too much, there is a risk of leakage.

Want to buy VSH brass compression fittings or need more information?

The desired 90° transition elbow can be ordered quickly and easily through our website or purchased at one of our locations. Still unsure about the optimal coupling for your situation? Contact one of our specialists for free advice.