BONFIX Solder brass elbow fitting. long 3/4" male thread x 22 mm

Brass threaded elbows can be used for water and/or gas piping systems. A solder fitting can be used to connect a copper pipe to an accessory, for example. The internal capillary diameter is 22 mm and the external thread is ¾ inch. This brass threaded elbow has a 90-degree angle.

Resources

To create a watertight and/or gas-tight connection to the pipe, you must remove grease and dirt before making the connection. You can use cleaners and degreasers for cleaning.

Assembly

It's important to cut the pipe straight when soldering the brass solder fitting to the pipe. You can do this with a pipe cutter . This brass elbow is connected using soft soldering. You first apply solder and then connect the pipe. The solder is heated at the narrow gap between the brass elbow and the copper pipe and is drawn in, making the connection watertight or gas-tight.

Quality mark

In addition to the Kiwa quality mark, this brass threaded elbow also has the Gastec QA quality mark, and can therefore be used for both gas and drinking water installations.