Viega Sanpress wall plate 15 X 1/2 (2225.5)

This wall plate is part of the Viega Profi/Sanpress central heating, air and water pipe system.

Because the fitting is made of bronze, it is corrosion-resistant, hygienic, and has a long service life. It is ideally suited for use with stainless steel pipes of classes 316 and 444.

In addition to this wall plate bracket, the Viega Profi/Sanpress range includes various accessories, including:

• wall plates,
• mounting kits,
• adapter sets,
• rosettes,
• press jaws.

Properties

The Viega wall plate has a maximum operating temperature range of 110°C with a maximum pressure of 16 bar for drinking water systems. For central heating pipe systems, the maximum operating temperature range is 110°C with a maximum pressure of 16 bar. For compressed air, the maximum operating temperature is 60°C with a maximum pressure of 150 mbar. The connector is equipped with the SC-Contur pressure test.

Quality mark

This Profi/Sanpress wall plate is Kiwa-approved. This makes the connector suitable for drinking water systems. This is also indicated by the green marking on the wall plate.

Assembly

An EPDM sealing ring and a mounting flange are included for attaching the wall plate. The plate has six screw holes for easy mounting to the wall plate bracket. Pressing can be completed using the Viega pressing tool.

Pressing takes just 3 steps:

• Cut the pipe to size and deburr the ends to prevent a noisy pipe.
• Mark the insertion depth and slide the pipe into the coupling up to the marking.
• Check that the press jaw is in the center of the raised edge and press the screw coupling.
• Thanks to the SC-Contur, unpressed connections are immediately detected during a press inspection. If the pressing is not performed correctly, water will leak from the coupling without it detaching from the pipe when pressure is applied.

For a wet pressure test, the pressure range is 1.0–6.5 bar, and for a dry pressure test, the pressure range is 22 mbar–3.0 bar. A clear drop in pressure is visible on the gauge during a dry pressure test.

Want to buy the Viega Profipress system or need more information?

You can quickly and easily order the wall plate you need through our website or purchase it at one of our locations. Still not sure which wall plate is best for your needs? Contact one of our specialists for free advice.