6/8/10/12/14/16 kW Rotenso Windmi monobloc subsidy € 3250
6/8/10/12/14/16 kW Rotenso Windmi monobloc subsidy € 3250
€2.295,00
/
- Beschrijving
- Eigenschappens
Rotenso Windmi Monobloc Heat Pump – Subsidy up to €3,250
Sustainable air-to-water heat pump for new construction and renovation. High efficiency (SCOP up to ~5), quiet operation. And suitable for heating, cooling, and (with a boiler) hot water. Ideal in combination with underfloor heating and low-temperature radiators.
Why Windmi?
- Power: 6, 8, 10, 12, 14, 16 kW
- High efficiency: SCOP up to ~5 (35 °C)
- Max. flow temperature: 62 °C
- Works at outdoor temperatures down to -25 °C
- Whisper-quiet at partial load
Subsidy (ISDE)
Indicative, depending on model/boiler combination:
- 6–10 kW: ~€2,100 – €3,050
- 12–16 kW: ~€3,100 – €3,250
Always check the current RVO amounts.
Installation service
- Customised advice & model determination
- Professional installation and commissioning
- Combination with buffer tank/boiler/PV possible
- Maintenance & breakdown service
Dimensions & placement
The dimensions below are the net dimensions of the outdoor unit ( Width × Depth × Height ).
| Model | Assets | Net dimensions (W x D x H) | Weight (indic.) | Power supply |
|---|---|---|---|---|
| WIM60X1 | 6 kW | 1335 × 475 × 875 mm | ± 109 kg | 1-phase |
| WIM80X1 | 8 kW | 1335 × 475 × 875 mm | ± 120 kg | 1-phase |
| WIM100X1 | 10 kW | 1335 × 475 × 875 mm | ± 126 kg | 1-phase |
| WIM120X3 | 12 kW | 1302 × 465 × 1517 mm | ± 181 kg | 3-phase |
| WIM140X3 | 14 kW | 1302 × 465 × 1517 mm | ± 183 kg | 3-phase |
| WIM160X3 | 16 kW | 1302 × 465 × 1517 mm | ± 183 kg | 3-phase |
Practical: Keep the front and top clear for airflow. In severe frost, preferably place the unit ≥ 300 mm above ground level (ice/condensation).
Performance (summary)
- SCOP (35 °C): up to ~5 (depending on model)
- Energy label: A+++ (35 °C), A++ (55 °C)
- Max. flow: 62 °C
- Heating operating range: −25 °C … +35 °C
- Cooling up to +43 °C
- Refrigerant: R32
Operation & integration
- Touch controller with clock functions and energy meter
- Wi-Fi (Tuya) & Modbus
- Smart-Grid Ready (PV connection)
- Silent mode available
Hydraulics (short checklist)
- Install Y-filter and sufficient system content (buffer tank if necessary)
- Correct flow setting (ΔT-controlled or with constant pump speed)
- Frost protection for pipes outside (insulation/trace of glycol)
- Provide ventilation and dirt separation
Electrical (short checklist)
- Correct power supply (1-phase up to 10 kW, 3-phase for 12–16 kW)
- Protection according to model table (automatic circuit breakers/fuses)
- Check phase sequence and earth
- Communication cabling for thermostat/control technology
Schedule a consultation now
Want to know for sure which Windmi version is right for you and where the unit is best placed? Schedule a free consultation with our specialists.
Frequently Asked Questions
Is my current installation suitable?
In most homes, yes, especially with underfloor heating or low-temperature radiators. If in doubt, we'll schedule a heat loss calculation and check the water-side balancing/buffer tank.
Can the Windmi also supply tap water?
Yes, in combination with a suitable hot water tank. We recommend the correct boiler capacity and install the hot water hydraulics correctly.
What about sound?
The Windmi is whisper-quiet under partial load and meets current noise standards. Proper setup and free airflow remain important.
What is the delivery time?
Standard delivery time is 2–7 business days after ordering (depending on the delivery address and carrier). We'll schedule an installation date together.
© New-Heating • Specifications and prices are subject to change and typographical errors.
|
No specifications available for this product. |
