Hep2O Knee 90° WI 22 PF/S

This Hep2O elbow 90° can be used in central heating and water pipe systems for cold and hot water to make a connection from plug to spigot end.

Properties

The Hep2O 90° elbow is suitable for central heating pipe systems and can withstand a maximum temperature of 82°C with a maximum pressure of 6 bar. For cold water pipe systems, it can withstand temperatures from 5°C to 25°C with a maximum pressure of 10 bar, and for hot water, the maximum temperature is 60°C with a maximum pressure of 6 bar. A Hep2O system is also demountable.

Material

Because the Hep2O 90° elbow is made of plastic, which conducts heat poorly, heat loss is reduced. This 90° elbow also has high wear resistance. Thanks to the smooth surface of the tube, dirt is virtually impossible to adhere to.

Assembly

A Hep2O fitting is installed using a leak-proof push-fit connection. To connect to a Hep2O pipe, a support sleeve is always required, unless it is a spigot. To connect to a copper pipe, a mounting ring must be used.

Mounting to a Hep2O tube takes just a few steps:

• Grab the tube from the middle of the roll, this way the tube will not roll back into the shape of the roll.
• Use pipe cutters to cut the pipe to size.
• Slide the support sleeve into the pipe and press it firmly. A support sleeve is not necessary for a fitting with a spigot end.
• Check the insertion length and tighten the fitting onto the pipe.

Looking to buy a Hep2O water or central heating pipe system or need more information?

The desired Hep2O knee can be ordered quickly and easily through our website or purchased at one of our locations. Still unsure which Hep2O tube is best for your situation? Contact one of our specialists for free advice.