Unico Evo monoblock air conditioner 25 HP PVAN R290 + inverter motor 2.1 kW cooling + 1.7 kW additional heating (incl. IR remote control and Wi-Fi)

This product does not fall under the European F-Gas Regulation, meaning that commissioning may also be carried out by companies without F-Gas certification.

Silent mode:
With the Silent Mode function enabled (compressor on), it reaches a maximum of 30 dB(A).

Sync power system:
The new Twin Rotary compressor and advanced electronics are synchronized for the greatest acoustic comfort, under all operating conditions.

Maximum efficiency
Thanks to the new compressor and the optimization of all components, Unico Evo achieves energy efficiency class A+ in cooling.

Technical data:

• Cooling capacity (min/max): 1.0 / 2.5 kW
• Heating capacity (min/max): 1.0 / 2.3 kW
• Nominal cooling capacity (1) Rated: 2.1 kW
• Nominal heating capacity (1) Rated: 1.7 kW
• Nominal power consumption during cooling (1) PEER: 0.8 kW
• Nominal power during cooling (1): 4.7 A
• Nominal power consumption during heating (1) PCOP: 0.5 kW
• Nominal power during heating (1): 3.4 A
• Nominal energy efficiency index (1) EERd: 2.6
• Nominal efficiency coefficient (1) COPd: 3.1
• Energy efficiency class for cooling (1): A
• Energy efficiency class for heating (1): A
• Power consumption in “thermostat off” PTO mode: 14 W
• Power consumption in standby mode (EN 62301) PSB: 0.8 W
• Power consumption for dual channel equipment (1) cooling QDD: 0.5 kWh/h
• Power consumption for double channel equipment (1) heating QDD: 0.5 kWh/h

Features:

• Cooling, additional heating, dehumidification and ventilation
• Economy function: enables energy savings through automatic optimization of machine performance
• Auto function: adjusts the operating parameters in relation to the ambient temperature.
• Silent Mode function: This mode sets the machine to the lowest noise level. The compressor and fans are set to reduce noise output by a maximum of 30 dB(A).
• Timer 24h

Features:

• Available in the HP version (heat pump). If there is no condensate drain, the machine can be configured during installation in the SF version (cold only) and the heating function can be deactivated.
• Cooling class: up to A+
• Refrigerant: R290 (GWP=3)
• The main internal components are accessible from the front on already installed machine
• Wide flap for even air distribution in the room Equipped with a multi-filter system consisting of an electrostatic filter (with anti-dust function) and an active carbon filter (effective against unpleasant odors)
• Backlit display with touch control on the machine
• Contact on/off for activation or energy boost.
• There is an RS485 port suitable for controlling the air conditioning with external BMS via Modbus RTU.
• Packaging 100% recyclable, 98% plastic-free.

Preconditions for operation

Internal ambient temperatures:

• Maximum operating temperatures in cooling mode DB 35°C - WB 24°C
• Minimum operating temperatures when cooling DB 18°C
• Maximum operating temperatures when heating DB 27°C
• Minimum operating temperatures when heating -

External ambient temperatures:

• Maximum operating temperatures in cooling mode DB 43°C - WB 32°C
• Minimum operating temperatures in cooling -
• Maximum operating temperatures when heating DB 24°C - WB 18°C
• Minimum operating temperatures when heating -15°C

(1) Test conditions: The data refer to the EN14511 standard - Heating mode: Temperature: external environment DB 7°C / WB 6°C; internal environment DB 20°C / WB 15°C Cooling mode: Temperature external environment DB 35°C / WB 24°C; internal environment DB 27°C / WB 19°C. * Hermetically sealed appliance using natural gas with GWP equivalent of 3.