BONFIX Alu-press repair coupling 16 x 16 mm

This Bonfix Alu-press repair coupling is used when existing piping is damaged and a section needs to be replaced. The repair coupling can be used in both low- and high-temperature water and heating systems.

In addition to this repair coupling, the Bonfix Alu-press range includes various accessories, including:

• Supply pipes.
• Cordless presses.
• Press couplings.

Properties

The Bonfix aluminum press fittings are color-coded, making it easy to see at a glance which size/color aluminum press fitting can be connected. The repair fitting has a working temperature range of -20°C to +90°C.

Quality mark

This aluminum press fitting has Kiwa and KOMO certification. This makes it suitable for drinking water systems.

Assembly

This repair coupling allows you to replace a section of pipe. Crimping can be performed using the Bonfix crimp tool.

Pressing takes just a few steps:

• Cut the tube to size and deburr the ends.
• Slide the fitting into the pipe until it stops.
• Check that the fitting is properly seated in the press jaw and complete the pressing in one go.
• Thanks to the LBP function, unpressed connections are immediately detected during a press inspection. If the pressing is not performed correctly, water will leak from the coupling.

Other

The aluminum press repair coupling is equipped with two O-rings. These EPDM O-rings are recessed into the brass body and have a silicone/Teflon coating. This keeps the O-rings in place and provides the correct seal.

Interested in purchasing the Bonfix Alu-press installation system or need more information?

You can quickly and easily order the repair coupling you need through our website or purchase it at one of our locations. Still unsure which repair coupling is best for your situation? Contact one of our product specialists for free advice.