Viega Sanpress mounting unit 15 X 1/2 X 150 (2222)

This wall plate bracket is part of the Viega Profi/Sanpress central heating, air and water pipe system and is used for wall installation.

The wall plate bracket is made of bronze and galvanized steel. The fitting, a 90° elbow made of bronze, is corrosion-resistant, hygienic, offers a long service life, and is ideally suited for use with stainless steel pipes of classes 316 and 444. The galvanized steel wall plate bracket has a protective coating that prevents corrosion, extending its lifespan. Steel is a strong material, making it an ideal mounting option.

In addition to this wall plate bracket, the Viega Profi/Sanpress range includes various accessories, including:

• wall plates,
• mounting kits,
• adapter sets,
• rosettes,
• press jaws.

Properties

The Viega wall plate bracket has a maximum operating temperature range of 110°C with a maximum pressure of 16 bar for drinking water systems. For central heating pipe systems, the maximum operating temperature range is 110°C with a maximum pressure of 16 bar. For compressed air systems, the maximum operating temperature is 60°C with a maximum pressure of 150 mbar. The connector is equipped with the SC-Contur pressure test.

Quality mark

This Profi/Sanpress wall plate with a 90° elbow is Kiwa-approved. This makes the 90° elbow suitable for drinking water systems. This is also indicated by the green marking on the wall plate.

Assembly

The wall plate bracket with connection is attached to the wall using the wall bracket. The wall plate bracket has screw holes for easy wall mounting. Pressing is performed using the Viega pressing tool.

Pressing takes just 3 steps:

• Cut the pipe to size and deburr the ends to prevent a noisy pipe.
• Mark the insertion depth and slide the pipe into the coupling up to the marking.
• Check that the press jaw is in the center of the raised edge and press the screw coupling.
• Thanks to the SC-Contur, unpressed connections are immediately detected during a press inspection. If the pressing is not performed correctly, water will leak from the coupling without it detaching from the pipe when pressure is applied.

For a wet pressure test, the pressure range is 1.0–6.5 bar, and for a dry pressure test, the pressure range is 22 mbar–3.0 bar. A clear drop in pressure is visible on the gauge during a dry pressure test.

Want to buy the Viega Profipress system or need more information?

You can quickly and easily order the wall plate bracket you need through our website or purchase it at one of our locations. Still unsure which wall plate bracket is best for your situation? Contact one of our specialists for free advice.