VIEGASKU: 871972
Viega Sanpress screw coupling 15 X 3/8 (2263)
€19,42
/
Tax included.
Shipping calculated at checkout.
Viega Sanpress screw coupling 15 X 3/8 (2263)
€19,42
/
Viega Sanpress screw coupling 15 X 3/8 (2263)
€19,42
/
Still in doubt?
Shipped within 1 day
All our products are certified
Fast delivery
Always service & Warranty
Fast shipping
Pay easily via Klarna or Afterpay
30 day money back guarantee
- Beschrijving
- Eigenschappens
This screw coupling is part of the Viega Profi/Sanpress central heating, air and water pipe system.
Because the fitting is made of bronze, it is corrosion-resistant, hygienic, and has a long service life. The union nut is made of brass. The fitting is ideally suited for use with stainless steel pipes of classes 316 and 444.
In addition to this screw coupling, the Viega Profi/Sanpress range includes various press fittings such as:
Pressing takes just 3 steps:
Because the fitting is made of bronze, it is corrosion-resistant, hygienic, and has a long service life. The union nut is made of brass. The fitting is ideally suited for use with stainless steel pipes of classes 316 and 444.
In addition to this screw coupling, the Viega Profi/Sanpress range includes various press fittings such as:
- curves,
- wire couplings,
- inserts,
- wall plates,
- T-pieces,
- transition couplings.
Properties
The Viega screw coupling has a maximum operating temperature range of 85°C with a maximum pressure of 16 bar for drinking water systems. For central heating pipe systems, the maximum operating temperature range is 110°C with a maximum pressure of 16 bar. For compressed air, the maximum operating temperature is 60°C with a maximum pressure of 150 mbar. The screw coupling is equipped with the SC-Contur press test.Quality mark
This Profi/Sanpress screw coupling has the Kiwa quality mark. This makes the press fitting suitable for drinking water systems. This is also indicated by the green marking on the screw coupling.Assembly
The pressing can be completed with the Viega tool.Pressing takes just 3 steps:
- Cut the pipe to size and deburr the ends to prevent a noisy pipe.
- Mark the insertion depth and slide the pipe into the coupling up to the marking.
- Check that the press jaw is in the center of the raised edge and press the screw coupling.
- Thanks to the SC-Contur, unpressed connections are immediately detected during a press inspection. If the pressing is not performed correctly, water will leak from the coupling without it detaching from the pipe when pressure is applied.
Want to buy the Viega Profipress system or need more information?
You can quickly and easily order the desired screw coupling through our website or purchase it at one of our locations. Still unsure which screw coupling is best for your situation? Contact one of our specialists for free advice.| ETIM Code | EC003024 |
| ETIM Class | Fitting with 2 connections |
| Model | 2-delig |
| Variant | 2263 |