VSH Multi Super compression set FF22x26

This VSH compression set is used in heating systems to create a transition between a multilayer pipe or plastic pipe and fittings. With a brass compression fitting, you can easily create a safe and leak-free connection without welding, soldering, or pressing.

Properties

The VSH compression set has a medium temperature range of -20 °C to +70 °C with a short-term peak temperature of 95 °C.

Assembly

With a brass compression fitting, you can easily create a strong and reliable connection without any special tools. All you need is a wrench to tighten the fitting, a pipe cutter to cut the pipe to size, and a deburrer to neaten the edges. The compression ring in the fitting ensures a leak-free connection.

Installing a compression set in a water pipe is done as follows:

• Cut the pipe to size and deburr the ends to prevent noisy piping.
• Slide the tube into the compression set and compression coupling.
• Tighten the clamp nut hand-tight.
• Then tighten the compression fitting with a wrench;
• 12 and 15 mm with 1 complete turn.
• 22mm with a half to three-quarter turn.
• 28mm or more with approx. three-quarter turn.

Caution: If the nut is tightened too much, there is a risk of leakage.

Want to buy VSH brass compression fittings or need more information?

The desired threaded coupling can be ordered quickly and easily through our website or purchased at one of our locations. Still unsure which coupling is best for your situation? Contact one of our specialists for free advice.